Mobil Delvac · MX · MX ESP · MX F2
Mobil Delvac MX Explained: Every MX Oil and Its AMSOIL Match
Mobil Delvac MX is a family of heavy-duty diesel oils, not one oil. Which MX you find depends on the country. This page sorts out Mobil Delvac MX, MX ESP and MX F2, what each one is rated for, and which AMSOIL oil fits the same job.
Last reviewed: November 2026 · Based on Mobil data sheets for Delvac MX 15W-40 (Mobil Ireland, 09-2026), MX ESP 15W-40 (Mobil UK, 08-2026), MX ESP 10W-30 (Mobil UK, 01-2026) and MX F2 15W-40 (Mobil US, 10-2024), and AMSOIL data sheets G3793, G3468, G3467 and G473
Mobil Delvac MX ESP is a CK-4 oil sold mainly in Europe and Asia-Pacific. The MX oil on Mobil's US site is Delvac MX F2 15W-40, an older API CI-4 PLUS oil. In the US and Canada, Mobil's CK-4 fleet oils are Delvac 1300 Super and Delvac Extreme. MX F2 is rated CI-4 PLUS, so it doesn't meet the CJ-4 or CK-4 rating that 2007 and newer on-highway diesels with a particulate filter call for. Red Seal tech pick: AMSOIL Commercial-Grade 15W-40 (SBDF) where you'd run MX ESP, and AMSOIL AME 15W-40 where you'd run MX F2 in an older engine without a DPF.
Mobil's country sites
15W-40 and 10W-30
on Mobil's US site
vs MX ESP 15W-40
Every Mobil Delvac MX Oil
Typical properties and ratings from each Mobil data sheet. Mobil's Mexico site also lists an MX F3 15W-40.
| MX 15W-40 | MX ESP 15W-40 | MX ESP 10W-30 | MX F2 15W-40 |
|---|---|---|---|
| Where Mobil lists it | |||
| Europe | Europe, UK, Asia-Pacific | Europe, UK, Asia-Pacific | US, Mexico |
| API diesel category | |||
| CI-4, CH-4 | CK-4 | CK-4 | CI-4 PLUS |
| Viscosity @ 100°C, cSt | |||
| 14.6 | 14.1 | 12 | 15.3 |
| TBN, mg KOH/g | |||
| 9.2 | 9.8 | 9.6 | 11 |
| Sulfated ash, % | |||
| 1.1 | 0.9 | 0.9 | Not listed |
| Pour point | |||
| −36°C | −33°C | −33°C | −36°C |
| Named OEM approvals | |||
| DFS 93K215, VDS-3, Mack EO-N, RLD-2 | None named | DFS 93K218, VDS-4.5, EOS-4.5, DTFR 15C100 and others | CES 20078, DFS 93K214, VDS-3, Mack EO-N and others |
Mobil doesn't list a high-temperature high-shear (HTHS) number on any of these four sheets, and lists no named OEM approvals on the MX ESP 15W-40 sheet.
Delvac MX F2 and Newer Trucks
MX F2 and the original MX 15W-40 are rated API CI-4 PLUS and CI-4. Those ratings came before diesel particulate filters went on North American on-highway trucks in 2007.
API CJ-4 arrived for 2007 engines with particulate filters, and API CK-4 replaced it for 2017 engines. CK-4 oils can go in older engines that called for CI-4 PLUS, but it doesn't work the other way. If your engine maker calls for CK-4, a CI-4 PLUS oil doesn't meet it.
⚠ Running a 2007 or newer on-highway diesel with a DPF: use an oil that meets your engine maker's current spec, such as Cummins CES 20086, Detroit DFS 93K222, Volvo VDS-4.5 or Mack EOS-4.5. Every AMSOIL oil on this page except AME meets the requirements of all four.
AMSOIL vs Delvac MX F2 15W-40: All Four Options
AMSOIL AME is the direct match for MX F2: a synthetic built to the same CI-4+ era specs, per AMSOIL data sheet G473. It meets the requirements of Cummins CES 20076, 20077 and 20078, Detroit 93K214, Volvo VDS-3, Mack EO-N and Caterpillar ECF-2, which covers most of the specs Mobil lists for MX F2. AMSOIL's three CK-4 oils are the other choice, and the right one if the fleet mixes older trucks with DPF-equipped ones, because CK-4 also works in engines that called for CI-4 PLUS.
| AME | Comm.-Grade | Heavy-Duty | Max-Duty | MX F2 |
|---|---|---|---|---|
| API | ||||
| CI-4+ | CK-4 | CK-4 | CK-4 | CI-4 PLUS |
| Base oil | ||||
| Synthetic | Synthetic blend | Full synthetic | Full synthetic | Not stated |
| HTHS @ 150°C, cP | ||||
| 4.3 | 4.6 | 4.7 | 4.5 | Not listed |
| TBN, mg KOH/g | ||||
| 12.1 | 10.0 | 10.2 | 10.1 | 11 |
| Viscosity @ 100°C, cSt | ||||
| 15.4 | 15.2 | 15.5 | 15.6 | 15.3 |
| Pour point | ||||
| −38°C | −36°C | −38°C | −40°C | −36°C |
| OK with a DPF or SCR | ||||
| No | Yes | Yes | Yes | No (not CJ-4 or CK-4) |
| Drain claim | ||||
| Up to 3X OEM, max 50,000 mi | OEM interval* | OEM interval* | Up to 3X OEM, max 60,000 mi | No figure |
*AMSOIL rates Commercial-Grade and Heavy-Duty for the OEM interval and says intervals may be extended with oil analysis. Older engines only: Shop AME 15W-40 →. Mixed fleet, old and new: Max-Duty (DME) covers both.
AMSOIL vs Delvac MX ESP 15W-40
All three AMSOIL heavy-duty levels against Mobil Delvac MX ESP 15W-40, the CK-4 MX.
| Comm.-Grade | Heavy-Duty | Max-Duty | MX ESP |
|---|---|---|---|
| API | |||
| CK-4 | CK-4 | CK-4 | CK-4 |
| HTHS @ 150°C, cP | |||
| 4.6 | 4.7 | 4.5 | Not listed |
| TBN, mg KOH/g | |||
| 10.0 | 10.2 | 10.1 | 9.8 |
| Viscosity @ 100°C, cSt | |||
| 15.2 | 15.5 | 15.6 | 14.1 |
| Pour point | |||
| −36°C | −38°C | −40°C | −33°C |
| Wear result, DD13 scuffing test (DFS 93K222) | |||
| 2X | 4X | 6X | No figure on sheet |
| Drain claim | |||
| OEM interval* | OEM interval* | Up to 3X OEM, max 60,000 mi | No figure; follow OEM |
*AMSOIL rates Commercial-Grade and Heavy-Duty for the OEM interval and says intervals may be extended with oil analysis. AMSOIL wear results use a 10W-30 as the worst case. Mobil's MX ESP sheet describes long drains and TBN retention without a number and says to follow OEM recommendations.
"Meets" vs "Approved": "Approved" means the oil is on the engine maker's own list. "Meets the requirements of" means the oil maker states it passes that spec's tests. AMSOIL's data sheets list the specs its oils are made for, and AMSOIL backs them with its own warranty. What the difference means for you →
AMSOIL Oils for the Same Job
Commercial-Grade, Heavy-Duty and Max-Duty each meet the requirements of Cummins CES 20086, Detroit DFS 93K222, Volvo VDS-4.5 and Mack EOS-4.5, per G3793, G3468 and G3467.
- Synthetic blend, over 50% synthetic
- TBN 10.0 vs MX ESP's 9.8
- 2X more wear protection than DFS 93K222 requires
- Also in 10W-30 (SBDT)
- Full synthetic
- HTHS 4.7 cP
- 4X more wear protection than DFS 93K222 requires
- Made to run OEM drain intervals
- Full synthetic
- 6X more wear protection than DFS 93K222 requires
- Up to 3X OEM drain, max 60,000 mi / 600 hr / 1 yr
- Confirm long drains with oil analysis
Running MX ESP 10W-30? Shop Commercial-Grade 10W-30 (SBDT) →
Own your truck or run a fleet? One truck under your own authority qualifies. Accounts are set up through Vyscocity Inc., an Independent AMSOIL Dealer.Open a Commercial Account →Mobil Delvac MX FAQ
Is Mobil Delvac MX sold in the US?
Mobil's US site lists Delvac MX F2 15W-40, an API CI-4 PLUS oil. The CK-4 MX ESP oils appear on Mobil's European, UK and Asia-Pacific sites. In the US and Canada, Mobil's CK-4 fleet oils are Delvac 1300 Super and Delvac Extreme.
What is the difference between Delvac MX and MX ESP?
Delvac MX 15W-40 is rated API CI-4 and ACEA E7, with 1.1% sulfated ash. Delvac MX ESP is rated API CK-4 with 0.9% sulfated ash, for engines with particulate filters and other aftertreatment.
Can I use Delvac MX F2 in a newer semi truck?
MX F2 is rated API CI-4 PLUS. 2007 and newer on-highway diesels with a particulate filter call for CJ-4 or CK-4 and their engine maker's spec, so check your owner's manual before using it.
What AMSOIL oil replaces Delvac MX ESP?
AMSOIL Commercial-Grade 15W-40 (SBDF) or 10W-30 (SBDT) is the closest match. Heavy-Duty (ADP) and Max-Duty (DME) are full-synthetic steps up, with Max-Duty rated up to 3X the OEM drain interval.
What AMSOIL oil replaces Delvac MX F2?
AMSOIL AME 15W-40, for older engines without a DPF or SCR. AME meets the requirements of the same CI-4+ era specs MX F2 lists, including Cummins CES 20078, Detroit 93K214 and Volvo VDS-3, with a TBN of 12.1 and a drain of up to 3X OEM, max 50,000 miles. If the fleet also runs DPF-equipped trucks, use a CK-4 oil such as AMSOIL Max-Duty (DME), which works in both.
Is Delvac MX ESP the same as Delvac 1300 Super?
They're different products. Both are CK-4 15W-40s with similar published viscosity and TBN (14.1 vs 14 cSt, 9.8 vs 9.4), but Mobil lists named OEM approvals for 1300 Super and none on the MX ESP 15W-40 sheet.
Sources
- Mobil Delvac MX 15W-40 product data sheet (Mobil Ireland)
- Mobil Delvac MX ESP 15W-40 product data sheet (Mobil UK)
- Mobil Delvac MX ESP 10W-30 product data sheet (Mobil UK)
- Mobil Delvac MX F2 15W-40 product data sheet (Mobil US)
- AMSOIL data sheets G3793 (Commercial-Grade Diesel Oil), G3468 (Heavy-Duty Synthetic Diesel Oil), G3467 (Signature Series Max-Duty Synthetic Diesel Oil) and G473 (Synthetic 15W-40 Heavy-Duty Diesel and Marine Oil, AME)
