PACCAR · MX-11 · 10.8L Inline-6

PACCAR MX-11 Oil Capacity, Oil Type & Drain Interval

PACCAR MX-11 oil capacity is 39 US quarts. The factory fill is 10W-30 API CK-4, and PACCAR allows drains up to 75,000 miles in line-haul work with idle under 20%.

Last reviewed: November 2026 · Based on PACCAR MX-11 service bulletin (NHTSA MC-10171027), PACCAR EPA 2024 MX-11 spec sheet, PACCAR TIB E256 and AMSOIL data sheet G3467

The PACCAR MX-11 holds 39 US qt (about 37 L) and takes API CK-4 oil, 10W-30 as the factory fill and recommended grade; 15W-40 CK-4 is also allowed. Drain intervals: 75,000 mi line haul with idle under 20%, 50,000 mi with idle over 20%, and 30,000 mi severe or vocational, all capped at 12 months. FA-4 is not part of PACCAR's MX-11 recommendation.

39 qt
Oil Capacity
US quarts
10W-30
Factory Fill
API CK-4

75K
Miles, Line Haul
Idle under 20%
30K
Miles, Severe
Vocational

10.8L
355–445 hp · 1,250–1,700 lb-ft
Quick Spec

PACCAR MX-11 Oil Capacity and Spec at a Glance

The PACCAR MX-11 oil capacity is 39 US quarts per PACCAR's spec sheet, and AMSOIL's lookup lists 38.6 qt. It runs API CK-4 oil, with 10W-30 as the factory fill. That is the same oil spec as the MX-13, in a smaller 10.8-litre engine.

EnginePACCAR MX-11 inline-6, 10.8 L
Ratings (EPA 2024)355–445 hp, 1,250–1,700 lb-ft
Oil system capacity39 US qt (about 37 L)
Oil categoryAPI CK-4
Factory fill10W-30 API CK-4
Also allowed15W-40 API CK-4 (PACCAR TIB E256)
Longest drain75,000 mi / 2,250 hr / 12 months (line haul, idle under 20%)
Oil Type

What Oil Does a PACCAR MX-11 Take?

PACCAR MX-11 oil is API CK-4, and PACCAR's recommended grade is 10W-30, the same oil the engine leaves the factory with. 15W-40 CK-4 is allowed. PACCAR's bulletin lists 10W-30 for normal operation above 5°F (−15°C) and says to use the oil pan heater when one is fitted.

10W-30 ★
Factory Fill · Recommended
  • CategoryAPI CK-4
  • UseNormal operation above 5°F (−15°C)
  • WhyPACCAR's own recommendation and fill
15W-40
Allowed
  • CategoryAPI CK-4
  • SourcePACCAR TIB E256
  • UseWarm climates, fleets standardized on 15W-40

Colder than 5°F (−15°C)? Check the viscosity chart in your MX-11 operator's manual before going thinner. AMSOIL's MX-11 lookup also lists Signature Series Max-Duty 5W-40 (DEO).

Drain Intervals

PACCAR MX-11 Oil Change Interval

The PACCAR MX-11 oil change interval runs 30,000 to 75,000 miles depending on duty cycle and idle time. Line haul at 6 mpg or better and 80,000 lb or less counts as normal duty; anything under 6 mpg, over 80,000 lb or vocational is severe. Every interval is capped at 12 months.

Duty cycleMiles (km)HoursTime
Line haul, idle under 20%75,000 (120,000)2,25012 months
Line haul, idle over 20%50,000 (80,000)1,50012 months
Severe / vocational30,000 (48,000)80012 months

Vocational includes dump, mixer, refuse, logging, construction, snowplow, pickup-and-delivery and wrecker work. PACCAR Solutions shows each truck's fuel economy, idle percentage and engine hours, so you can pick the right row instead of guessing.

The idle number is the one that moves you. Cross 20% idle and the interval drops from 75,000 to 50,000 miles. A truck idling overnight in winter can cross that line without anyone noticing. Oil analysis at each change shows whether the oil is holding up at the interval you're running.

Get an Oil Analysis Kit →
FA-4

Can a PACCAR MX-11 Use FA-4 Oil?

Stick with CK-4 in the MX-11. PACCAR's MX-11 bulletin and TIB E256 recommend API CK-4, and the factory fill is 10W-30 CK-4. FA-4 is a lower-HTHS category that is not backward compatible, so it should only go in an engine whose maker lists it.

⚠ Don't confuse grade with category. A 10W-30 can be CK-4 or FA-4. The MX-11 needs the CK-4 version. Check for "API CK-4" in the donut on the jug, not just the viscosity number.

Recommended Products

Best Oil for the PACCAR MX-11

The best oil for the PACCAR MX-11 matches PACCAR's own call: a 10W-30 API CK-4. AMSOIL Signature Series Max-Duty 10W-30 (DTT) is that oil in full synthetic, and it lists Cummins CES 20086, Volvo VDS-4.5 and Mack EOS-4.5, so it also covers mixed fleets.

15W-40 Option
AMSOIL Signature Series Max-Duty
15W-40 · DME · API CK-4
  • For fleets standardized on 15W-40
  • HTHS 4.5 cP
  • Also lists Allison TES 439
  • Full synthetic Signature Series Max-Duty
Shop DME 15W-40 →
Value 15W-40
AMSOIL Heavy-Duty Synthetic Diesel Oil
15W-40 · ADP · API CK-4
  • Full synthetic CK-4
  • 4X more wear protection than the Detroit DD13 scuffing test requires
  • Up to 66% less oil consumption than API CK-4 allows
  • Run it at the PACCAR interval; go further only on oil analysis
Shop ADP 15W-40 →

Own your truck or run a fleet of MX-11s? One truck under your own authority qualifies.

Open a Commercial Account →
FAQ

PACCAR MX-11 Oil FAQ

What is the PACCAR MX-11 oil capacity?

39 US quarts (about 37 litres), per PACCAR's EPA 2024 MX-11 spec sheet. AMSOIL's lookup lists 38.6 quarts. Check the dipstick after the fill; pan and filter setups vary by truck.

What oil does a PACCAR MX-11 take?

API CK-4. PACCAR fills the MX-11 with 10W-30 CK-4 at the factory and recommends 10W-30 for normal operation above 5°F (−15°C). 15W-40 CK-4 is also allowed under PACCAR TIB E256.

How often do you change oil in a PACCAR MX-11?

Every 75,000 miles (2,250 hours) in line haul with idle under 20%, 50,000 miles (1,500 hours) with idle over 20%, and 30,000 miles (800 hours) in severe or vocational work. All three are capped at 12 months.

Can you use FA-4 oil in a PACCAR MX-11?

Stick with CK-4. PACCAR's MX-11 recommendations call for API CK-4, and FA-4 is not backward compatible with CK-4 engines.

What is the difference between the PACCAR MX-11 and MX-13 for oil?

Same oil spec and same drain intervals. The MX-11 is 10.8 litres and holds 39 US quarts; the MX-13 is 12.9 litres and holds 42 US quarts.

Scroll to Top