Comparison · AMSOIL Max-Duty & Heavy-Duty 5W-40 vs Mobil Delvac 1 ESP
AMSOIL vs Mobil Delvac 1 ESP: Two AMSOIL 5W-40s Compared
AMSOIL vs Mobil Delvac 1 ESP isn't one oil against one oil. Delvac 1 ESP is a single 5W-40. AMSOIL makes two synthetic CK-4 5W-40s: Signature Series Max-Duty (DEO) and Heavy-Duty Synthetic (ADO). Here are all three side by side, so you can pick the level you want.
Last reviewed: November 2026 · Based on Mobil's US product data sheets for Delvac 1 ESP 5W-40 and Delvac 1 Advanced Fuel Economy 5W-30, and AMSOIL data sheets G3467 and G3468
Both AMSOIL 5W-40s publish a higher HTHS and easier cold cranking than Mobil Delvac 1 ESP. HTHS is 4.3 cP for Max-Duty (DEO) and 4.2 for Heavy-Duty (ADO), against 3.8 for Delvac 1 ESP. All three are synthetic API CK-4 oils covering Cummins CES 20086 and Detroit DFS 93K222. ADO is the step up at OEM drain intervals. DEO adds a published extended drain: up to 3X OEM, max 60,000 miles. Delvac 1 ESP carries formal OEM approvals, a higher TBN (12) and a lower pour point, and Mobil sells an FA-4 oil, which AMSOIL does not. Red Seal tech pick: AMSOIL Max-Duty 5W-40 (DEO).
DEO · ADO · Delvac
vs Mobil 6,510
Mobil vs AMSOIL
Mobil gives none
Specs and Approvals
Mobil lists formal OEM approvals; AMSOIL lists the specs its oils meet the requirements of. "Not listed" means the spec isn't on that oil's US data sheet.
| AMSOIL DEO | AMSOIL ADO | Delvac 1 ESP |
|---|---|---|
| API | ||
| CK-4 | CK-4 | CK-4 |
| Base oil (as each brand describes it) | ||
| Full synthetic | Full synthetic | "Advanced synthetic" |
| Cummins CES 20086 | ||
| Meets | Meets | Approved |
| Detroit DFS 93K222 | ||
| Meets | Meets | Approved |
| Volvo VDS-4.5 / Mack EOS-4.5 | ||
| Meets | Meets | Not listed |
| Ford WSS-M2C171-F1 | ||
| Meets | Meets | Not listed |
| Daimler DTFR 15C100 | ||
| Not listed | Not listed | Approved |
| Published drain | ||
| 3X OEM, max 60,000 mi | OEM interval | None given |
Published Lab Numbers
Typical properties from each data sheet. All three are 5W-40.
| AMSOIL DEO | AMSOIL ADO | Delvac 1 ESP |
|---|---|---|
| HTHS @ 150°C, cP (higher = thicker hot film) | ||
| 4.3 | 4.2 | 3.8 |
| Cold cranking @ −30°C, cP (lower = easier start) | ||
| 5,555 | 5,581 | 6,510 |
| Viscosity @ 100°C, cSt | ||
| 15.4 | 15.2 | 13.8 |
| TBN, mg KOH/g | ||
| 10.1 | 10.2 | 12 |
| Sulfated ash, % | ||
| 0.99 | 1.0 | 1.0 |
| Pour point | ||
| −43°C | −42°C | −48°C |
A higher HTHS means a thicker oil film at operating temperature. Lower cold-cranking viscosity means easier cold starts. A higher TBN means more acid-neutralizing reserve. A lower pour point means the oil still flows at lower temperatures. In the Detroit DD13 scuffing test for DFS 93K222, AMSOIL reports 6X more wear protection than required for Max-Duty (G3467) and 4X for Heavy-Duty (G3468), each using 10W-30 as the worst case.
Pick Your Level
Both are top-tier synthetic diesel oils. Pick by what your engine and your operation need.
| Your situation | Better fit |
|---|---|
| A step up from Delvac 1 ESP at OEM drain intervals | AMSOIL Heavy-Duty ADO |
| The most margin, plus a published extended drain | AMSOIL Max-Duty DEO, with oil analysis |
| Volvo, Mack or Ford spec on the same jug | Either AMSOIL 5W-40 |
| You need a formal OEM approval on the label | Mobil Delvac 1 ESP |
| Engine manual lists FA-4 and you want it | Mobil Delvac 1 Advanced Fuel Economy 5W-30 |
Running 15W-40? The 15W-40 match is AMSOIL Max-Duty 15W-40 (DME). Delvac 1 ESP is a 5W-40. See Mobil Delvac oils explained for Mobil's 15W-40s.
⚠ Going past the OEM interval: AMSOIL backs its 3X drain with oil analysis. Without lab reports on your own trucks, stay on the engine maker's schedule whichever oil you run.
AMSOIL 5W-40s to Compare With Delvac 1 ESP
Each of these meets the requirements of Cummins CES 20086, Volvo VDS-4.5 and Mack EOS-4.5, per G3467 and G3468.
- HTHS 4.3 cP vs 3.8 for Delvac 1 ESP
- Cold cranking 5,555 cP at −30°C vs 6,510
- Also meets DFS 93K222, Ford F1 and MS-10902
- Up to 3X OEM drain, max 60,000 mi / 600 hr / 1 yr
- HTHS 4.2 cP vs 3.8 for Delvac 1 ESP
- Cold cranking 5,581 cP at −30°C vs 6,510
- Made to run OEM drain intervals
- Extend past OEM only with oil analysis
- For engines that run 15W-40
- Meets DFS 93K222 and Cat ECF-3
- Same Max-Duty drain limit as DEO
- Full synthetic Signature Series Max-Duty
AMSOIL vs Mobil Delvac 1 ESP FAQ
Is Mobil Delvac 1 ESP better than AMSOIL?
Neither wins on everything. On the published numbers, both AMSOIL 5W-40s have a higher HTHS and easier cold cranking. Delvac 1 ESP has a higher TBN, a lower pour point and formal OEM approvals.
What AMSOIL oil compares to Delvac 1 ESP?
Two do: Heavy-Duty Synthetic 5W-40 (ADO) for OEM drain intervals, and Signature Series Max-Duty 5W-40 (DEO) for extended drains. Both are synthetic API CK-4 oils.
How long can Delvac 1 ESP run between changes?
Mobil's US data sheet gives no figure and refers you to the owner's handbook for drain intervals. AMSOIL rates DEO for up to 3X OEM, not to exceed 60,000 miles, 600 hours or one year, with oil analysis.
Does Mobil make an FA-4 diesel oil?
Yes, Mobil Delvac 1 Advanced Fuel Economy 5W-30, an FA-4 oil approved for Detroit DFS 93K223 that meets Cummins CES 20087. AMSOIL does not make an FA-4 oil.
Can I mix AMSOIL and Mobil Delvac?
AMSOIL says its diesel oils are compatible with other oils, but mixing shortens oil life, and AMSOIL doesn't support extended drains on mixed oil. Do a full change when you switch.
Sources
- Mobil Delvac 1 ESP 5W-40 product data sheet (Mobil US)
- Mobil Delvac 1 Advanced Fuel Economy 5W-30 product data sheet (Mobil US)
- AMSOIL data sheets G3467 (Signature Series Max-Duty Synthetic Diesel Oil) and G3468 (Heavy-Duty Synthetic Diesel Oil)
