Ford · Super Duty · F-650 / F-750 · L-Series · AeroMax · Louisville

Ford Diesel Engine Oil: Super Duty, F-650/F-750 & L-Series Trucks

Ford diesel engine oil depends on which Ford you drive and what's under the hood. Super Duty pickups and newer F-650/F-750s run Ford's 6.7 Power Stroke and need Ford's WSS-M2C171-F1 oil. Ford's Class 8 L-Series trucks ran Cummins, Cat and Detroit engines, so they follow those engine makers' oil specs.

Last reviewed: November 2026 · Based on the Ford Super Duty Owner's Manual (cited on the 6.7 Power Stroke page), Equipment World (2016 F-650/F-750 engine change), the Ford L series history, and AMSOIL data sheets G3467 and G3468

A Ford diesel takes the oil its engine maker calls for. The 6.7 Power Stroke in Super Duty pickups and 2016-and-newer F-650/F-750s needs oil that meets Ford WSS-M2C171-F1, usually 10W-30. F-650/F-750s built before 2016 have a Cummins ISB 6.7 and follow Cummins' oil spec. Ford's L-Series, AeroMax and Louisville Class 8 trucks (1970–1998) ran Cummins, Caterpillar and Detroit Diesel engines. Those are pre-DPF engines, so a CK-4 15W-40 covers them. Red Seal tech picks: AMSOIL DTT 10W-30 for the Power Stroke, DME 15W-40 for the L-Series.

F1
6.7 Power Stroke
Ford spec
2016
F-650/F-750 switch
Cummins → Ford

1970–98
L-Series
Class 8 trucks
15W-40
L-Series engines
CK-4 covers them

3 truck lines
Super Duty · F-650/F-750 · L-Series
Choose Your Truck

Ford Diesel Trucks at a Glance

Find your truck, then your engine. The engine decides the oil.

Ford truckEngineOil spec
Super Duty6.7 Power StrokeFord F1
F-650 / F-750 2016+6.7 Power StrokeFord F1
F-650 / F-750 pre-2016Cummins ISB 6.7Cummins spec
L-Series / AeroMax / LouisvilleCummins, Cat, DetroitEngine maker's spec

F-650 and F-750 capacity: medium-duty Fords hold more oil than a Super Duty pickup. Use the figure in your truck's owner's manual.

Super Duty & F-650/F-750

Ford 6.7 Power Stroke Oil

The 6.7 Power Stroke needs oil that meets Ford WSS-M2C171-F1. Ford recommends 10W-30, and a Super Duty oil change takes 13 quarts on 2011–2022 trucks and 15 quarts on 2023 and newer.

⚠ CK-4 alone doesn't meet the Ford spec: when CK-4 and FA-4 arrived in 2016, Ford told Super Duty owners to use only oils approved for WSS-M2C171-F1 and told commercial users to avoid FA-4. Look for WSS-M2C171-F1 on the jug or data sheet.

Grades for towing, B20 biodiesel and deep cold, plus Ford's oil-life monitor ranges, are on the full page.

Ford 6.7 Power Stroke Oil Guide →
L-Series · AeroMax · Louisville

Ford L-Series Truck Oil

Ford built its L-Series heavy trucks in Louisville, Kentucky from 1970 to 1998, including the L8000, L9000, LTL-9000, AeroMax and Louisville. Ford sold its heavy-truck business to Freightliner at the end of 1996, and the line carried on as Sterling.

L-Series engineOil guide
Cummins
NTC, L10, N14
Classic diesel
Caterpillar
3406, 3176
Cat 3406E
Detroit Diesel
Series 60
Series 60
Detroit two-stroke
6-71, 8-71, 6-92, 8-92
Two-stroke guide

Every L-Series engine predates the diesel particulate filter. API says today's CK-4 oil can lubricate engines calling for the older categories, so a CK-4 15W-40 covers the four-stroke engines. A CI-4+ oil like AMSOIL AME also fits these pre-DPF engines.

⚠ Two-stroke Detroits are different: the 6-71, 8-71, 6-92 and 8-92 have their own Detroit oil rules. Use the Detroit two-stroke guide, not the four-stroke advice above.

Not sure which engine is in yours? The engine's data plate names it. An older truck may also have been repowered since it left the factory.

Recommended Products

Best Oil for Ford Diesel Trucks

Match the oil to the engine: a Ford F1 10W-30 for the Power Stroke and a CK-4 15W-40 for the Cummins, Cat and Detroit engines in older Ford trucks.

L-Series & Cummins ISB
AMSOIL Signature Series Max-Duty
15W-40 · DME · API CK-4
  • Meets the requirements of Cummins CES 20086
  • Also meets Cat ECF-3 and DDC 93K214/215/218
  • Lists API CJ-4, CI-4+ and CF for older engines
  • One oil for a mixed-age Ford fleet
Shop DME 15W-40 →
Pre-DPF Only
AMSOIL Heavy-Duty Diesel & Marine
15W-40 · AME · API CI-4+
  • For applications specifying API CI-4+ and prior
  • Fits L-Series four-stroke engines
  • Not for engines with a diesel particulate filter
  • Not for the 6.7 Power Stroke
Shop AME 15W-40 →
Own your truck or run a fleet? One truck under your own authority qualifies. Accounts are set up through Vyscocity Inc., an Independent AMSOIL Dealer.Open a Commercial Account →
FAQ

Ford Diesel Engine Oil FAQ

What oil does a Ford 6.7 Power Stroke take?

Oil that meets Ford WSS-M2C171-F1, usually 10W-30. That covers Super Duty pickups and 2016-and-newer F-650/F-750 trucks.

What oil does a Ford L9000 take?

It depends on the engine. L-Series trucks ran Cummins, Caterpillar and Detroit Diesel engines. The four-stroke engines can run a CK-4 15W-40. Two-stroke Detroits have their own oil rules.

What engine is in a Ford F-650 or F-750?

From 2016, Ford's own 6.7 Power Stroke. Before that, the Cummins ISB 6.7, which follows Cummins' oil spec.

Does Ford still build Class 8 trucks?

No. Ford sold its heavy-truck business to Freightliner at the end of 1996 and ended Louisville/AeroMax production in 1998. The line continued as Sterling.

Can I use AMSOIL AME in a Ford diesel?

Only in pre-DPF engines like those in L-Series trucks. AME is a CI-4+ oil, so keep it out of the 6.7 Power Stroke, which needs Ford's F1 spec.

Sources

Sources

Scroll to Top