Mobil Delvac · Extreme · 15W-40 · 10W-30
AMSOIL vs Mobil Delvac Extreme: Three AMSOIL Levels Compared
Mobil Delvac Extreme is Mobil's synthetic fleet oil in 15W-40 and 10W-30, with a drain claim of up to 2X OEM. AMSOIL makes three heavy-duty levels to compare it with. This AMSOIL vs Delvac Extreme comparison puts all four side by side, from each brand's data sheet.
Last reviewed: November 2026 · Based on Mobil's US data sheet for Delvac Extreme (10-2024) and AMSOIL data sheets G3793 (Commercial-Grade), G3468 (Heavy-Duty) and G3467 (Max-Duty)
Delvac Extreme is Mobil's synthetic CK-4 oil, and its closest AMSOIL match is Max-Duty, the full synthetic built for extended drains. In 15W-40, all three AMSOIL levels publish a higher HTHS (4.5 to 4.7 vs 4.1 cP), easier cold cranking (4,932 to 5,226 vs 6,100 cP at −20°C) and a lower pour point. Extreme publishes a slightly higher TBN (10.3 vs 10.0 to 10.2) and carries formal OEM approvals, including Detroit DFS 93K222 and Allison TES 439. On drains, Extreme claims up to 2X OEM; AMSOIL Max-Duty goes up to 3X OEM, max 60,000 miles, with oil analysis. Red Seal tech pick: AMSOIL Max-Duty 15W-40 (DME) to replace Delvac Extreme.
Max-Duty vs Extreme
Max-Duty vs Extreme
Max-Duty vs Extreme
by level
15W-40: Three AMSOIL Levels vs Delvac Extreme
Typical properties from each data sheet. Commercial-Grade (SBDF), Heavy-Duty (ADP) and Max-Duty (DME) against Delvac Extreme 15W-40.
| Comm.-Grade | Heavy-Duty | Max-Duty | Extreme |
|---|---|---|---|
| Base oil | |||
| Synthetic blend | Full synthetic | Full synthetic | Synthetic basestocks |
| HTHS @ 150°C, cP (higher = thicker hot film) | |||
| 4.6 | 4.7 | 4.5 | 4.1 |
| Cold cranking @ −20°C, cP (lower = easier start) | |||
| 5,226 | 4,932 | 4,934 | 6,100 |
| TBN, mg KOH/g (acid reserve) | |||
| 10.0 | 10.2 | 10.1 | 10.3 |
| Viscosity @ 100°C, cSt | |||
| 15.2 | 15.5 | 15.6 | 14.3 |
| Pour point | |||
| −36°C | −38°C | −40°C | −33°C |
| Wear result, DD13 scuffing test (DFS 93K222) | |||
| 2X | 4X | 6X | No figure on sheet |
| Drain claim | |||
| OEM interval* | OEM interval* | Up to 3X OEM, max 60,000 mi | Up to 2X OEM** |
*AMSOIL rates Commercial-Grade and Heavy-Duty for the OEM interval and says intervals may be extended with oil analysis. **Mobil: "Consult OEM or ExxonMobil before implementing extended ODIs." AMSOIL wear results use a 10W-30 as the worst case. Mobil's Extreme sheet describes wear protection without a number.
Specs and Approvals
Mobil lists formal approvals; AMSOIL lists the specs its oils meet the requirements of. What the difference means.
| AMSOIL (all 3 levels) | Delvac Extreme 15W-40 |
|---|---|
| API | |
| CK-4 | CK-4 |
| Base oil | |
| Commercial-Grade: synthetic blend, over 50% synthetic. Heavy-Duty and Max-Duty: full synthetic | "Premium synthetic", made with synthetic basestocks |
| Cummins CES 20086 | |
| Meets | Approved |
| Detroit DFS 93K222 | |
| Meets | Approved |
| Volvo VDS-4.5 / Mack EOS-4.5 | |
| Meets | Approved |
| Ford WSS-M2C171-F1 | |
| Meets | Approved |
| Allison TES 439 | |
| Heavy-Duty and Max-Duty 15W-40: meets. Commercial-Grade: not listed | Approved (15W-40 only) |
| Chrysler MS 10902 | |
| Meets | Not listed |
| Caterpillar ECF-3 | |
| Meets | Meets |
| Daimler DTFR 15C100 | |
| Not listed | Approved |
"Meets" vs "Approved": "Approved" means the oil is on the engine maker's own list. "Meets the requirements of" means the oil maker states it passes that spec's tests. AMSOIL's data sheets list the specs its oils are made for, and AMSOIL backs them with its own warranty. What the difference means for you →
10W-30: Three AMSOIL Levels vs Delvac Extreme
Commercial-Grade (SBDT), Heavy-Duty (ADN) and Max-Duty (DTT) against Delvac Extreme 10W-30.
| Comm.-Grade | Heavy-Duty | Max-Duty | Extreme |
|---|---|---|---|
| HTHS @ 150°C, cP | |||
| 3.5 | 3.6 | 3.5 | 3.6 |
| Cold cranking @ −25°C, cP | |||
| 5,960 | 5,591 | 4,858 | 6,600 |
| TBN, mg KOH/g | |||
| 10.0 | 10.2 | 10.1 | 9.6 |
| Viscosity @ 100°C, cSt | |||
| 12.1 | 12.0 | 12.1 | 11.8 |
| Pour point | |||
| −38°C | −38°C | −42°C | −42°C |
In 10W-30, the HTHS numbers are close and Max-Duty matches Extreme's −42°C pour point. All three AMSOIL oils publish a higher TBN and easier cold cranking. Mobil says Extreme 10W-30 can improve fuel economy compared with a conventional 15W-40, without giving a figure.
Which One Makes Sense
All four are serious fleet oils. Pick by the drain you want and the margin you're buying.
| Your situation | Better fit |
|---|---|
| Longest published drain, most wear margin | AMSOIL Max-Duty, with oil analysis |
| Full synthetic at the OEM interval, highest HTHS | AMSOIL Heavy-Duty |
| Synthetic blend at the OEM interval | AMSOIL Commercial-Grade (a step down from Extreme on base oil) |
| Cold-weather starts | Any AMSOIL level: lower cold-cranking numbers than Extreme |
| You need formal OEM approvals on the label | Mobil Delvac Extreme |
⚠ Every extended drain here depends on your trucks: AMSOIL backs longer drains with oil analysis, and Mobil says to consult the OEM or ExxonMobil first. Without lab reports on your own trucks, stay on the engine maker's schedule.
AMSOIL Oils to Compare With Delvac Extreme
Each meets the requirements of Cummins CES 20086, Detroit DFS 93K222, Volvo VDS-4.5, Mack EOS-4.5 and Ford WSS-M2C171-F1, per G3467, G3468 and G3793.
- Full synthetic
- Up to 3X OEM drain, max 60,000 mi / 600 hr / 1 yr
- 6X more wear protection than DFS 93K222 requires
- Also in 10W-30 (DTT)
- Full synthetic
- HTHS 4.7 cP vs Extreme's 4.1
- 4X more wear protection than DFS 93K222 requires
- Made to run OEM drain intervals. Also in 10W-30 (ADN)
- Synthetic blend, over 50% synthetic
- HTHS 4.6 cP vs Extreme's 4.1
- 2X more wear protection than DFS 93K222 requires
- Made to run OEM drain intervals. Also in 10W-30 (SBDT)
Running 10W-30? Max-Duty DTT · Heavy-Duty ADN · Commercial-Grade SBDT
Own your truck or run a fleet? One truck under your own authority qualifies. Accounts are set up through Vyscocity Inc., an Independent AMSOIL Dealer.Open a Commercial Account →AMSOIL vs Delvac Extreme FAQ
Is Mobil Delvac Extreme a full synthetic?
Mobil calls Delvac Extreme a premium synthetic diesel engine oil formulated with synthetic basestocks. Delvac 1300 Super, by comparison, is Mobil's synthetic blend.
What AMSOIL oil replaces Delvac Extreme?
AMSOIL Max-Duty (DME 15W-40 or DTT 10W-30) is the closest match: a full synthetic with a longer published drain. Heavy-Duty (ADP or ADN) is the full synthetic for OEM intervals.
How long can Delvac Extreme run between changes?
Mobil claims up to 2X beyond the OEM interval and says to consult the OEM or ExxonMobil first. AMSOIL Max-Duty goes up to 3X OEM, max 60,000 miles, 600 hours or one year, with oil analysis.
What is the difference between Delvac Extreme and Delvac 1300 Super?
Extreme is made with synthetic basestocks and claims up to 2X OEM drains. 1300 Super is a synthetic blend with a claim of up to 50% past OEM. Extreme 15W-40 lists DFS 93K222; 1300 Super 15W-40 lists the older 93K218.
Can I mix AMSOIL and Mobil Delvac?
AMSOIL says its diesel oils are compatible with other oils, but mixing shortens oil life, and AMSOIL doesn't support extended drains on mixed oil. Do a full change when you switch.
Sources
- Mobil Delvac Extreme 10W-30 and 15W-40 product data sheet (Mobil US, 10-2024)
- AMSOIL data sheets G3467 (Signature Series Max-Duty Synthetic Diesel Oil), G3468 (Heavy-Duty Synthetic Diesel Oil) and G3793 (Commercial-Grade Diesel Oil)
