Detroit · Series 60 · Inline-6 · Non-EGR, EGR & EPA07

Detroit Series 60 Engine Oil: Oil Type, Capacity & Change Interval

Detroit Series 60 engine oil depends on which Series 60 you have: non-EGR, EGR (2002–2006) or the 2007 EPA07 engine with a diesel particulate filter. A CK-4 15W-40 that meets all three Detroit specs covers every one of them.

Last reviewed: November 2026 · Based on Detroit Diesel's Lubricating Oil, Fuel and Filters publication (DDC-SVC-BRO-0001, 2008), the Series 60 On-Highway Operator's Guide (DDC-SVC-MAN-0039, 2009) and AMSOIL data sheets G3467 and G3468

A Detroit Series 60 takes a 15W-40 heavy-duty diesel oil, and Detroit's spec depends on the engine: 93K215 for non-EGR engines, 93K214 (CI-4 PLUS) for 2002–2006 EGR engines and 93K218 (CJ-4) for the 2007 EPA07 engine with a DPF. Detroit's 2009 Operator's Guide lists 40 quarts with filters. Drain intervals run 15,000 miles on pre-2007 trucks (22,500 on EGR engines with Detroit-listed oil) and 30,000 miles long haul on EPA07. Red Seal tech pick: AMSOIL Max-Duty 15W-40 (DME), which meets the requirements of DDC 93K214, 93K215 and 93K218.

15W-40
Common grade
all three types
40 qt
With filters
2009 guide

15,000 mi
Pre-2007
highway truck
30,000 mi
EPA07
long haul

93K218
Detroit spec for the 2007 Series 60 with DPF
Oil Type

What Oil Does a Detroit Series 60 Take?

Detroit Series 60 engine oil follows the engine's emissions hardware. Detroit's 2008 lube publication sets one spec for each type.

Series 60Detroit specOil class
Non-EGR93K215CI-4 PLUS recommended
EGR, no DPF (2002–2006)93K214CI-4 PLUS
EPA07 with DPF93K218CJ-4

⚠ The 2007 Series 60 has a DPF: Detroit warns that CI-4 PLUS oils in EPA07 engines may cause premature aftertreatment filter plugging. Keep high-ash, non-DPF oils such as AMSOIL AME out of a 2007 Series 60.

Today's CK-4 oils that list DDC 93K214, 93K215 and 93K218 cover all three. AMSOIL DME, DEO and ADP list all three Detroit specs, plus API CJ-4 and CI-4+. FA-4 isn't on any Series 60 spec, so keep it out. More: CK-4 vs FA-4.

Grade: 15W-40 for most trucks. Below -10°C (14°F), Detroit allows 5W-40 or 10W-30 with an HT/HS of at least 3.7 cP. AMSOIL DEO 5W-40 is 4.3 cP per G3467. Detroit says not to use monograde oils on-highway.

Capacity

Detroit Series 60 Oil Capacity

Detroit Series 60 oil capacity is 40 quarts with the filters, per Detroit's 2009 Series 60 On-Highway Operator's Guide. The pan alone holds 32 quarts to FULL.

Detroit figureQuarts
Pan to LOW, no filters26 qt
Pan to FULL, no filters32 qt
Total with filters40 qt

Older trucks: those figures come from the 2009 guide. Pans vary by truck build, so finish at the dipstick: refill, run the engine, shut it down, let it drain back, then top up to FULL.

Drain Intervals

Detroit Series 60 Oil Change Interval

The Detroit Series 60 oil change interval is in Detroit's lube publication: one table for EPA07 engines and one for pre-2007 engines.

Series 60ServiceOil drain
EPA07Long haul30,000 mi
48,000 km
EPA07Short haul20,000 mi
500 hr
6 months
EPA07Severe15,000 mi
300 hr
3 months
Pre-2007Highway truck15,000 mi
24,000 km
Pre-2007 EGRDetroit-listed oil22,500 mi
36,200 km

EPA07 intervals are for 93K218 oil on ultra-low sulfur diesel, whichever limit comes first. Pre-2007 intervals are for oil from Detroit's list, on ULSD.

⚠ Going past Detroit's interval: do it on oil analysis. A Series 60 with high mileage, EGR or heavy idle time can load oil with soot and fuel fast.

Get an Oil Analysis Kit →
Recommended Products

Best Oil for the Detroit Series 60

The best oil for a Detroit Series 60 is a CK-4 that lists DDC 93K214, 93K215 and 93K218, so one oil covers every version. AMSOIL DME, DEO and ADP all meet those requirements, per G3467 and G3468.

Cold Weather
AMSOIL Signature Series Max-Duty
5W-40 · DEO · API CK-4
  • Meets the requirements of DDC 93K214, 93K215 and 93K218
  • HT/HS 4.3 cP, above Detroit's 3.7 minimum
  • For starts below -10°C (14°F)
  • Full synthetic Signature Series Max-Duty
Shop DEO 5W-40 →
OEM Intervals
AMSOIL Heavy-Duty Synthetic
15W-40 · ADP · API CK-4
  • Meets the requirements of DDC 93K214, 93K215 and 93K218
  • Full synthetic heavy-duty diesel oil
  • Made to run OEM drain intervals
  • A fit for older fleet trucks
Shop ADP 15W-40 →
Own your truck or run a fleet? One truck under your own authority qualifies. Accounts are set up through Vyscocity Inc., an Independent AMSOIL Dealer.Open a Commercial Account →
FAQ

Detroit Series 60 Engine Oil FAQ

What oil does a Detroit Series 60 take?

A 15W-40 heavy-duty diesel oil. Detroit's spec is 93K215 for non-EGR engines, 93K214 for 2002–2006 EGR engines and 93K218 for the 2007 EPA07 engine. A CK-4 that lists all three covers every Series 60.

How many quarts of oil does a Series 60 hold?

40 quarts with the filters, per Detroit's 2009 Series 60 On-Highway Operator's Guide. The pan holds 32 quarts to FULL without filters. Finish at the dipstick on older trucks.

How often should you change Series 60 oil?

Detroit lists 15,000 miles for pre-2007 highway trucks, 22,500 miles on EGR engines with Detroit-listed oil, and 30,000 miles long haul for the 2007 EPA07 engine. Short haul and severe service are shorter.

Does the Series 60 have a DPF?

The 2007 EPA07 Series 60 does. Detroit warns that CI-4 PLUS oil in an EPA07 engine may plug the aftertreatment filter early, so use a 93K218 (CJ-4) or newer CK-4 oil.

Can I use AMSOIL AME in a Series 60?

Not in a 2007 Series 60 with a DPF. AME is made for engines without exhaust aftertreatment. DME covers every Series 60, including the DPF engine.

Scroll to Top