Mobil Delvac · 1300 Super · 15W-40 · 10W-30

AMSOIL vs Mobil Delvac 1300 Super: Three AMSOIL Levels Compared

Mobil Delvac 1300 Super is Mobil's synthetic-blend fleet oil in 15W-40 and 10W-30. AMSOIL makes three heavy-duty levels to compare it with, from a synthetic blend to a full synthetic built for extended drains. Here are all four side by side, from each brand's data sheet.

Last reviewed: November 2026 · Based on Mobil's US data sheet for Delvac 1300 Super (07-2026) and AMSOIL data sheets G3793 (Commercial-Grade), G3468 (Heavy-Duty) and G3467 (Max-Duty)

Delvac 1300 Super is a synthetic-blend CK-4 oil, and its closest AMSOIL match is Commercial-Grade, also a synthetic blend. In 15W-40, all three AMSOIL levels publish a higher HTHS (4.5 to 4.7 vs 4.0 cP), a higher TBN (10.0 to 10.2 vs 9.4) and a lower pour point. They also meet the requirements of Detroit's current DFS 93K222, where Mobil's 15W-40 sheet lists the older 93K218. 1300 Super carries formal OEM approvals and claims up to 50% past the OEM drain, a longer claim than AMSOIL Commercial-Grade or Heavy-Duty. For a longer drain on AMSOIL, Max-Duty goes up to 3X OEM. Red Seal tech pick: AMSOIL Commercial-Grade 15W-40 (SBDF) to replace 1300 Super, or Max-Duty (DME) for extended drains.

4.6 vs 4.0
15W-40 HTHS, cP
Comm.-Grade vs 1300
10.0 vs 9.4
15W-40 TBN
Comm.-Grade vs 1300

+50%
1300 Super drain
claim past OEM
2X · 4X · 6X
AMSOIL wear results
by level

Synthetic blend vs synthetic blend
1300 Super and AMSOIL Commercial-Grade
15W-40

15W-40: Three AMSOIL Levels vs 1300 Super

Typical properties from each data sheet. Commercial-Grade (SBDF), Heavy-Duty (ADP) and Max-Duty (DME) against Delvac 1300 Super 15W-40.

Comm.-GradeHeavy-DutyMax-Duty1300 Super
HTHS @ 150°C, cP (higher = thicker hot film)
4.64.74.54.0
TBN, mg KOH/g (acid reserve)
10.010.210.19.4
Viscosity @ 100°C, cSt
15.215.515.614
Pour point
−36°C−38°C−40°C−33°C
Wear result, DD13 scuffing test (DFS 93K222)
2X4X6XNone published
Drain claim
OEM interval*OEM interval*Up to 3X OEM, max 60,000 miUp to 50% past OEM**

*AMSOIL rates Commercial-Grade and Heavy-Duty for the OEM interval and says intervals may be extended with oil analysis. **Mobil: "Consult OEM or ExxonMobil before implementing extended ODIs." AMSOIL wear results use a 10W-30 as the worst case.

Specs

Specs and Approvals

Mobil lists formal approvals; AMSOIL lists the specs its oils meet the requirements of. All three AMSOIL levels carry the same core list. What the difference means.

AMSOIL (all 3 levels)1300 Super 15W-40
API
CK-4CK-4
Base oil
Commercial-Grade: synthetic blend, over 50% synthetic. Heavy-Duty and Max-Duty: full synthetic"Premium synthetic blend"
Cummins CES 20086
MeetsApproved
Detroit
Meets DFS 93K222 (current)Approved DFS 93K218 (older)
Volvo VDS-4.5 / Mack EOS-4.5
MeetsApproved
Ford WSS-M2C171-F1
MeetsNot listed for 15W-40
Chrysler MS 10902
MeetsNot listed
Caterpillar ECF-3
MeetsMeets
Daimler DTFR 15C100
Not listedApproved

Running a DD13, DD15 or DD16? Detroit's current CK-4 spec is DFS 93K222. Mobil's 1300 Super 10W-30 sheet lists 93K222; the 15W-40 sheet lists 93K218. More: DFS 93K222 explained.

10W-30

10W-30: Three AMSOIL Levels vs 1300 Super

Commercial-Grade (SBDT), Heavy-Duty (ADN) and Max-Duty (DTT) against Delvac 1300 Super 10W-30.

Comm.-GradeHeavy-DutyMax-Duty1300 Super
HTHS @ 150°C, cP
3.53.63.53.6
TBN, mg KOH/g
10.010.210.19.6
Viscosity @ 100°C, cSt
12.112.012.112
Pour point
−38°C−38°C−42°C−33°C

In 10W-30, the HTHS numbers are close. The AMSOIL oils publish a higher TBN and a lower pour point. Mobil's 10W-30 sheet lists approvals for DFS 93K222 and Ford WSS-M2C171-F1, and all three AMSOIL 10W-30s meet the requirements of both.

Pick Your Level

Which One Makes Sense

All four are serious fleet oils. Pick by the drain you want and the margin you're buying.

Your situationBetter fit
Straight swap for a synthetic-blend fleet oilAMSOIL Commercial-Grade
Full synthetic at the OEM intervalAMSOIL Heavy-Duty
Longest published drain, most marginAMSOIL Max-Duty, with oil analysis
A longer drain claim on a synthetic blendMobil Delvac 1300 Super (+50% OEM)
You need formal OEM approvals on the labelMobil Delvac 1300 Super

⚠ Every extended drain here depends on your trucks: AMSOIL backs longer drains with oil analysis, and Mobil says to consult the OEM or ExxonMobil first. Without lab reports on your own trucks, stay on the engine maker's schedule.

Get an Oil Analysis Kit →
Recommended Products

AMSOIL Oils to Compare With 1300 Super

Each meets the requirements of Cummins CES 20086, Detroit DFS 93K222, Volvo VDS-4.5 and Mack EOS-4.5, per G3793, G3468 and G3467.

Heavy-Duty
AMSOIL Heavy-Duty Synthetic
15W-40 · ADP · API CK-4
  • Full synthetic
  • HTHS 4.7 cP, the highest of the four
  • 4X more wear protection than DFS 93K222 requires
  • Made to run OEM drain intervals
Shop ADP 15W-40 →
Max-Duty
AMSOIL Signature Series Max-Duty
15W-40 · DME · API CK-4
  • Full synthetic
  • 6X more wear protection than DFS 93K222 requires
  • Up to 3X OEM drain, max 60,000 mi / 600 hr / 1 yr
  • Confirm long drains with oil analysis
Shop DME 15W-40 →

Running 10W-30? Shop Commercial-Grade 10W-30 (SBDT) →

Own your truck or run a fleet? One truck under your own authority qualifies. Accounts are set up through Vyscocity Inc., an Independent AMSOIL Dealer.Open a Commercial Account →
FAQ

AMSOIL vs Delvac 1300 Super FAQ

Is Mobil Delvac 1300 Super synthetic?

Mobil's current US data sheet calls it a "premium synthetic blend diesel engine oil", made with severely hydro-processed base stocks. It isn't a full synthetic.

What AMSOIL oil replaces Delvac 1300 Super?

AMSOIL Commercial-Grade is the closest match: a synthetic blend in the same 15W-40 and 10W-30 grades. Heavy-Duty and Max-Duty are full-synthetic steps up.

How long can Delvac 1300 Super run between changes?

Mobil claims up to 50% beyond the OEM-recommended interval and says to consult the OEM or ExxonMobil first. AMSOIL Commercial-Grade and Heavy-Duty are rated for the OEM interval; Max-Duty goes up to 3X OEM, max 60,000 miles, with oil analysis.

Does Delvac 1300 Super meet DFS 93K222?

Mobil's 10W-30 sheet lists DFS 93K222. The 15W-40 sheet lists the older DFS 93K218. All three AMSOIL 15W-40s meet the requirements of DFS 93K222.

Can I mix AMSOIL and Mobil Delvac?

AMSOIL says its diesel oils are compatible with other oils, but mixing shortens oil life, and AMSOIL doesn't support extended drains on mixed oil. Do a full change when you switch.

Sources

Sources

Scroll to Top