Mobil Delvac · 1300 Super · 15W-40 · 10W-30
AMSOIL vs Mobil Delvac 1300 Super: Three AMSOIL Levels Compared
Mobil Delvac 1300 Super is Mobil's synthetic-blend fleet oil in 15W-40 and 10W-30. AMSOIL makes three heavy-duty levels to compare it with, from a synthetic blend to a full synthetic built for extended drains. Here are all four side by side, from each brand's data sheet.
Last reviewed: November 2026 · Based on Mobil's US data sheet for Delvac 1300 Super (07-2026) and AMSOIL data sheets G3793 (Commercial-Grade), G3468 (Heavy-Duty) and G3467 (Max-Duty)
Delvac 1300 Super is a synthetic-blend CK-4 oil, and its closest AMSOIL match is Commercial-Grade, also a synthetic blend. In 15W-40, all three AMSOIL levels publish a higher HTHS (4.5 to 4.7 vs 4.0 cP), a higher TBN (10.0 to 10.2 vs 9.4) and a lower pour point. They also meet the requirements of Detroit's current DFS 93K222, where Mobil's 15W-40 sheet lists the older 93K218. 1300 Super carries formal OEM approvals and claims up to 50% past the OEM drain, a longer claim than AMSOIL Commercial-Grade or Heavy-Duty. For a longer drain on AMSOIL, Max-Duty goes up to 3X OEM. Red Seal tech pick: AMSOIL Commercial-Grade 15W-40 (SBDF) to replace 1300 Super, or Max-Duty (DME) for extended drains.
Comm.-Grade vs 1300
Comm.-Grade vs 1300
claim past OEM
by level
15W-40: Three AMSOIL Levels vs 1300 Super
Typical properties from each data sheet. Commercial-Grade (SBDF), Heavy-Duty (ADP) and Max-Duty (DME) against Delvac 1300 Super 15W-40.
| Comm.-Grade | Heavy-Duty | Max-Duty | 1300 Super |
|---|---|---|---|
| HTHS @ 150°C, cP (higher = thicker hot film) | |||
| 4.6 | 4.7 | 4.5 | 4.0 |
| TBN, mg KOH/g (acid reserve) | |||
| 10.0 | 10.2 | 10.1 | 9.4 |
| Viscosity @ 100°C, cSt | |||
| 15.2 | 15.5 | 15.6 | 14 |
| Pour point | |||
| −36°C | −38°C | −40°C | −33°C |
| Wear result, DD13 scuffing test (DFS 93K222) | |||
| 2X | 4X | 6X | None published |
| Drain claim | |||
| OEM interval* | OEM interval* | Up to 3X OEM, max 60,000 mi | Up to 50% past OEM** |
*AMSOIL rates Commercial-Grade and Heavy-Duty for the OEM interval and says intervals may be extended with oil analysis. **Mobil: "Consult OEM or ExxonMobil before implementing extended ODIs." AMSOIL wear results use a 10W-30 as the worst case.
Specs and Approvals
Mobil lists formal approvals; AMSOIL lists the specs its oils meet the requirements of. All three AMSOIL levels carry the same core list. What the difference means.
| AMSOIL (all 3 levels) | 1300 Super 15W-40 |
|---|---|
| API | |
| CK-4 | CK-4 |
| Base oil | |
| Commercial-Grade: synthetic blend, over 50% synthetic. Heavy-Duty and Max-Duty: full synthetic | "Premium synthetic blend" |
| Cummins CES 20086 | |
| Meets | Approved |
| Detroit | |
| Meets DFS 93K222 (current) | Approved DFS 93K218 (older) |
| Volvo VDS-4.5 / Mack EOS-4.5 | |
| Meets | Approved |
| Ford WSS-M2C171-F1 | |
| Meets | Not listed for 15W-40 |
| Chrysler MS 10902 | |
| Meets | Not listed |
| Caterpillar ECF-3 | |
| Meets | Meets |
| Daimler DTFR 15C100 | |
| Not listed | Approved |
Running a DD13, DD15 or DD16? Detroit's current CK-4 spec is DFS 93K222. Mobil's 1300 Super 10W-30 sheet lists 93K222; the 15W-40 sheet lists 93K218. More: DFS 93K222 explained.
10W-30: Three AMSOIL Levels vs 1300 Super
Commercial-Grade (SBDT), Heavy-Duty (ADN) and Max-Duty (DTT) against Delvac 1300 Super 10W-30.
| Comm.-Grade | Heavy-Duty | Max-Duty | 1300 Super |
|---|---|---|---|
| HTHS @ 150°C, cP | |||
| 3.5 | 3.6 | 3.5 | 3.6 |
| TBN, mg KOH/g | |||
| 10.0 | 10.2 | 10.1 | 9.6 |
| Viscosity @ 100°C, cSt | |||
| 12.1 | 12.0 | 12.1 | 12 |
| Pour point | |||
| −38°C | −38°C | −42°C | −33°C |
In 10W-30, the HTHS numbers are close. The AMSOIL oils publish a higher TBN and a lower pour point. Mobil's 10W-30 sheet lists approvals for DFS 93K222 and Ford WSS-M2C171-F1, and all three AMSOIL 10W-30s meet the requirements of both.
Which One Makes Sense
All four are serious fleet oils. Pick by the drain you want and the margin you're buying.
| Your situation | Better fit |
|---|---|
| Straight swap for a synthetic-blend fleet oil | AMSOIL Commercial-Grade |
| Full synthetic at the OEM interval | AMSOIL Heavy-Duty |
| Longest published drain, most margin | AMSOIL Max-Duty, with oil analysis |
| A longer drain claim on a synthetic blend | Mobil Delvac 1300 Super (+50% OEM) |
| You need formal OEM approvals on the label | Mobil Delvac 1300 Super |
⚠ Every extended drain here depends on your trucks: AMSOIL backs longer drains with oil analysis, and Mobil says to consult the OEM or ExxonMobil first. Without lab reports on your own trucks, stay on the engine maker's schedule.
AMSOIL Oils to Compare With 1300 Super
Each meets the requirements of Cummins CES 20086, Detroit DFS 93K222, Volvo VDS-4.5 and Mack EOS-4.5, per G3793, G3468 and G3467.
- Synthetic blend, over 50% synthetic, like 1300 Super
- HTHS 4.6 cP vs 4.0; TBN 10.0 vs 9.4
- 2X more wear protection than DFS 93K222 requires
- Also in 10W-30 (SBDT)
- Full synthetic
- HTHS 4.7 cP, the highest of the four
- 4X more wear protection than DFS 93K222 requires
- Made to run OEM drain intervals
- Full synthetic
- 6X more wear protection than DFS 93K222 requires
- Up to 3X OEM drain, max 60,000 mi / 600 hr / 1 yr
- Confirm long drains with oil analysis
Running 10W-30? Shop Commercial-Grade 10W-30 (SBDT) →
Own your truck or run a fleet? One truck under your own authority qualifies. Accounts are set up through Vyscocity Inc., an Independent AMSOIL Dealer.Open a Commercial Account →AMSOIL vs Delvac 1300 Super FAQ
Is Mobil Delvac 1300 Super synthetic?
Mobil's current US data sheet calls it a "premium synthetic blend diesel engine oil", made with severely hydro-processed base stocks. It isn't a full synthetic.
What AMSOIL oil replaces Delvac 1300 Super?
AMSOIL Commercial-Grade is the closest match: a synthetic blend in the same 15W-40 and 10W-30 grades. Heavy-Duty and Max-Duty are full-synthetic steps up.
How long can Delvac 1300 Super run between changes?
Mobil claims up to 50% beyond the OEM-recommended interval and says to consult the OEM or ExxonMobil first. AMSOIL Commercial-Grade and Heavy-Duty are rated for the OEM interval; Max-Duty goes up to 3X OEM, max 60,000 miles, with oil analysis.
Does Delvac 1300 Super meet DFS 93K222?
Mobil's 10W-30 sheet lists DFS 93K222. The 15W-40 sheet lists the older DFS 93K218. All three AMSOIL 15W-40s meet the requirements of DFS 93K222.
Can I mix AMSOIL and Mobil Delvac?
AMSOIL says its diesel oils are compatible with other oils, but mixing shortens oil life, and AMSOIL doesn't support extended drains on mixed oil. Do a full change when you switch.
Sources
- Mobil Delvac 1300 Super 15W-40 and 10W-30 product data sheet (Mobil US, 07-2026)
- AMSOIL data sheets G3793 (Commercial-Grade Diesel Oil), G3468 (Heavy-Duty Synthetic Diesel Oil) and G3467 (Signature Series Max-Duty Synthetic Diesel Oil)
