Allison · 1000 / 2000 / 3000 / 4000 Series · On-highway

Allison Transmission Fluid: TES-668, TES-295 & TES-389 Explained

Allison transmission fluid is graded by Allison's own Transmission Engineering Standards (TES), not by a generic ATF label. TES-668 is the newest spec and the factory fill, TES-295 is the earlier synthetic spec, and TES-389 is the standard-interval spec.

Last reviewed: November 2026 · Based on Allison's approved-fluid page and lists (TES-668 dated Sept 4, 2026; TES-295/468 June 18, 2025; TES-389 March 31, 2026), W.W. Williams (Allison distributor) fluid guidance and AMSOIL's Torque-Drive product page

Allison transmission fluid for an on-highway 1000–4000 Series should be a TES-668 approved fluid. Allison recommends TES-668 for every on-highway product and made it the factory fill from January 2021. It is backward compatible with TES-295. TES-668 and TES-295 fluids earn Allison's extended drain intervals (with Allison High Capacity filters); TES-389 fluids get the standard intervals. Check the back of the jug for the TES approval number, and check it against Allison's list.

TES-668
Newest spec
Factory fill 2021+
TES-295
Earlier synthetic
Extended drains

TES-389
Standard spec
Standard drains
No C-4
Not for on-highway
No DEXRON-VI

1000–4000
Allison on-highway Series · H 40/50 EP · eGen
The Specs

Allison TES-668 vs TES-295 vs TES-389

Allison publishes a separate approved-fluid list for each TES spec. The spec decides which drain interval your transmission gets.

SpecWhat it isDrain interval
TES-668Newest synthetic spec; factory fill for new and reman Allisons. Allison recommends it for 1000, 2000, 3000, 4000, H 40/50 EP, eGen Flex and eGen Power on-highwayExtended
TES-295 / TES-468Earlier synthetic spec for 1000–4000 and H 40/50 EP; Allison suggests TES-668 at the next serviceExtended
TES-389Mineral-based, Dexron III-type fluid for traditional on-highway productsStandard

Mixing: TES-668 is backward compatible with any Allison transmission that calls for TES-295, so you can move to TES-668 at the next fluid change without a special flush.

⚠ Not for commercial Allisons: Allison's distributor guidance says C-4 fluids and DEXRON-VI are no longer recommended in any commercial on-highway Allison transmission.

Drain Intervals

Allison Transmission Fluid Change Interval

Allison's extended drain intervals apply only with a TES-668 or TES-295 approved fluid plus Allison High Capacity filters. TES-389 fluids follow the standard schedule. The exact miles, hours and months depend on your series and vocation, so take them from Allison's operator's manual or your Allison dealer.

Filter changeFluid lost (approx.)
1000/2000: control main filter1 pint (0.47 L)
3000/4000: main filter2 quarts (1.9 L)
3000/4000: lube filter8 quarts (7.6 L)
eGen Flex: main / lube filter1 quart (0.94 L) / 3 quarts (2.84 L)

Know your filters: Allison High Capacity filters for 3000/4000 carry P/N 29558294 or 29558295 on the end cap; the earlier filters read 29538231 or 29538232. Allison Prognostics on 3000/4000 requires the High Capacity filters.

Fluid analysis is the way to confirm the fluid is holding up in hard vocational work: fleet oil analysis.

AMSOIL

Where AMSOIL Torque-Drive Fits

AMSOIL Torque-Drive (ATD) is a 100% synthetic heavy-duty ATF. AMSOIL lists it for transmissions that require Allison TES-295, TES-389, TES-668 or C-4, along with ZF, Voith, MAN, Volvo and Mercedes-Benz specs.

⚠ Straight answer: AMSOIL Torque-Drive is not on Allison's current TES-668, TES-295/468 or TES-389 approved-fluid lists, and Allison ties its extended drain intervals to those lists. With Torque-Drive, run standard intervals or confirm with fluid analysis. Choosing a different brand of fluid does not by itself void a warranty, and AMSOIL backs Torque-Drive with its own limited warranty. How your warranty is protected →

Out-of-Warranty Units
AMSOIL Torque-Drive Synthetic ATF
ATD · 100% synthetic
  • AMSOIL lists it for Allison TES-295, TES-389 and TES-668 applications
  • Also ZF TE-ML, Voith, MAN 339, Volvo 97340/97341, MB 236.91
  • One ATF for mixed fleets of Allison, ZF and Voith units
  • AMSOIL says to follow the OEM's extended service interval
Shop Torque-Drive ATD →
Vocational or transit fleet? A business running its own trucks qualifies. Accounts are set up through Vyscocity Inc., an Independent AMSOIL Dealer.Open a Commercial Account →
FAQ

Allison Transmission Fluid FAQ

What fluid does an Allison transmission take?

An Allison-approved fluid for your transmission's spec. For on-highway 1000–4000 Series units, Allison recommends TES-668, its newest spec and the factory fill since 2021. TES-295 and TES-389 approved fluids are also listed.

What is the difference between TES-295 and TES-668?

Both are synthetic specs that earn Allison's extended drain intervals. TES-668 is newer, with better oxidation stability, wear protection and friction durability, and it is backward compatible with TES-295 transmissions.

Is TES-389 synthetic?

No. TES-389 is a mineral-based, Dexron III-type fluid for traditional on-highway products, and it follows Allison's standard drain intervals instead of the extended ones.

Can I use C-4 or DEXRON-VI in an Allison?

Not in a commercial on-highway Allison. Allison's distributor guidance says C-4 fluids and DEXRON-VI are no longer recommended there.

Is AMSOIL Torque-Drive Allison approved?

It is not on Allison's current approved-fluid lists; AMSOIL lists it for transmissions that require TES-295, TES-389 and TES-668. Using it does not by itself void a warranty, and AMSOIL backs it with its own limited warranty. Allison's extended drain intervals are tied to its approved lists, so run standard intervals or confirm with fluid analysis.

Scroll to Top